home *** CD-ROM | disk | FTP | other *** search
- Path: trocaz.yorku.ca!geoffc
- From: geoffc@yorku.ca (Geoffrey Carman )
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: MaxTransfter for Maxtor?
- Date: 1 Jan 1996 21:22:46 GMT
- Organization: York University
- Message-ID: <4c9jb6$h2p@sunburst.ccs.yorku.ca>
- References: <4c74ll$gkk@brockman.serv.net> <4c93gr$t4g@rapidnet.com>
- NNTP-Posting-Host: trocaz.yorku.ca
- X-Newsreader: TIN [version 1.2 PL2]
-
- Warren Block (wblock@rapidnet.com) wrote:
- : Robert Iacullo (eagle@serv.net) wrote:
- : : Hi all. Can anyone tell me what the MaxTransfer rate should
- : : be for a Maxtor 7546 IDE drive. Mine is acting up and I think
- : : that this is what is wrong. Thanks in advance.
-
- : For most or all Maxtors (and most other drives) it should be 0x0001FE00.
-
- Warren,
- Could you explain what axTransfer means? I have a new Quantum
- Trailblazer 850, with my GVP 040 card in my A2000, and when I got it, I
- partitioned, formatted, and started to copy things over from my older 425
- Quantum. In any case, now when I do large (40-80 Megs) copies from the 425
- t the 850, the whole computer resets. It sometimes gets thru a lot of the copy
- sometimes gets thru a little. I even had it crash when ding a GetSizes in
- Dir Opus on the 425. I am pretty certain that the terminatin is ok, as I just
- went thru the fun of adding the 850 and SCSI CD. Now it all works, SCSI
- reselection is off for the SCSI CDROM, and the chain is as follows, from the
- GVP SCSI connector to the SCSI CD-ROM, device 1, to the Quantum 425 device 0,
- to the Quantum 850, device 6, which is definitly terminated.
- Any suggestions?
-
- --
- Geoffrey Carman
- Userservices, CCIS
- York University
- geoffc@yorku.ca
-
-